News>
2007 Drinking Water Quality Report
30 May 2008

Attached is the Annual Drinking Water Quality Report:

 

HIDE-A-WAY WATER SYSTEM
Zoe Bretzious-Bowers, Certified Water Operator
PWS ID #550013 Pearl River County
510 E. LAKESHORE DR.
CARRIERE, MS 39426
601-798-1484
 
Is my water safe? 
Last year, as in years past, your tap water met all U. S. Environmental Protection Agency (EPA) and Mississippi State Department of Health drinking water standards. We vigilantly safeguard our water supply and once again we are proud to report that our system has not violated a maximum contaminant level or any other water quality standard. This report is a snapshot of last year’s water quality. Included are details about where your water comes from, what it contains, and how it compares to standards set by regulatory agencies. We are committed to providing you with information because informed customers are our best allies.
 
Do I need to take special precautions?
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).
 
Where does my water come from?
Our water comes from two (2) wells that draw ground water from the Miocene Series Aquifer.
 
Source water assessment and its availability:
Our source water assessment has been completed by the Mississippi State Department of Health. Copies will be made available upon request.
 
Why are there contaminants in my drinking water?
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that the water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline at 1-800-426-4791.
 
How can I get involved?
Our board meets on the 2nd WEDNESDAY evening of every month. Meetings start at 6:30 pm at the Hide-A-Way Lake Club House. We encourage all customers who have any concerns or questions to meet with us. Our association conducts its annual membership meeting on the third Saturday in July at 10:00 a.m. at the Hide-A-Way Lake Club House. This is a very important meeting in which all customers are encouraged to attend.
 
Other information:
You may want additional information about your drinking water. You may contact our certified waterworks operator or you may prefer to log on to the Internet and obtain specific information about your system and its compliance history at the following address: http://www.msdh.state.us/watersupply/index.htm. Information including current and past boil water notices, compliance and reporting violations, and other information pertaining to your water supply including “Why, When, and How to Boil Your Drinking Water” and “Flooding and Safe Drinking Water” may be obtained.
 
Water Quality Data Table
 
The following table lists all of the drinking water contaminants that we detected during the calendar year of this report. The presence of contaminants in the water does not necessarily indicate that the water poses a health risk. Unless otherwise noted, the data presented in this table is from testing done in the calendar year of the report. The EPA and the Mississippi State Department of Health requires us to monitor for certain contaminants less than once per year because the concentrations of these contaminants do not change frequently. Some of the data though representative of the water quality may be more than one year old.


Terms and Abbreviations used in the Table

 
MCLG:Maximum Contaminant Level Goal - is the level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.
MCL: Maximum Contaminant Level - The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.
AL: Action Level - The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.
 
 
TEST RESULTS
 
 
Contaminant
 
MCLG
 
MCL
 
Your
Water
 
Sample
Date
 
Violation
Y/N
 
Likely Source of Contamination
 
Inorganic Contaminants
 
 
7. Antimony (ppm)
      Well #2
      Well #3
 
 
6
6
 
 
.0006
.0006
 
 
.0005
.0005
 
 
03/22/06
03/22/06
 
 
NO
NO
 
 
Discharge from petroleum refineries; fire retardants; ceramics; electronics; solder.
 
 
8. Arsenic (ppm)
      Well #2
      Well #3
 
 
N/A
 
 
 
.05
.05
 
 
.0005
.0005
 
 
03/22/06
03/22/06
 
 
NO
NO
 
Erosion of natural deposits; runoff from orchards; runoff from glass and electronics production wastes.
 
 
10. Barium (ppm)
      Well #2
      Well #3
 
 
2
2
 
 
2
2
 
 
.005
.007
 
 
03/22/06
03/22/06
 
 
NO
NO
 
 
Discharge of drilling waste; discharge from metal refineries; erosion of natural deposits.
 
 
11. Beryllium (ppm)
      Well #2
      Well #3
 
 
4
4
 
 
.004
.004
 
 
.0001
.0001
 
 
03/22/06
03/22/06
 
 
NO
NO
 
Discharge from metal refineries and coal-burning factories; discharge from electrical, aerospace, and defense industries.
 
 
12. Cadmium (ppm)
      Well #2
      Well #3
 
 
5
5
 
 
.005
.005
 
 
.0001
.0001
 
 
03/22/06
03/22/06
 
 
NO
NO
 
Corrosion of galvanized pipes; erosion of natural deposits; discharge from metal refineries; runoff from waste batteries and paints.
 
 
13. Chromium (ppm)
      Well #2
      Well #3
 
 
100
100
 
 
0.1
0.1
 
 
.0006
.001
 
 
03/22/06
03/22/06
 
 
NO
NO
 
Discharge from steel and pulp mills; erosion of natural deposits.
 
15. Cyanide (ppm)
      Well #2
      Well #3
 
200
200
 
.2
.2
 
.005
.005
 
03/22/06
03/22/06
 
NO
NO
Discharge from steel/metal factories; discharge from plastic and fertilizer factories.
 
18. Mercury (inorganic) (ppm)
      Well #2
      Well #3
 
2
2
 
.002
.002
 
.0002
.0002
 
03/22/06
03/22/06
 
NO
NO
Erosion of natural deposits; discharge from refineries and factories; runoff from landfills; runoff from cropland.
 
 
19. Nitrate (as Nitrogen) (ppm)
      Well #2
      Well #3
 
 
10
10
 
 
10
10
 
 
0.08
0.08
 
 
05/14/07
05/14/07
 
 
NO
NO
 
Runoff from fertilizer use; leaching from septic tanks, sewerage; erosion of natural deposits.
 
20. Nitrite (as Nitrogen) (ppm)
      Well #2
      Well #3
1
1
1
1
0.02
0.02
05/14/07
05/14/07
NO
NO
 
Runoff from fertilizer use; leaching from septic tanks, sewerage; erosion of natural deposits.
 
21. Selenium (ppm)
      Well #2
      Well #3
50
50
.05
.05
0.0005
0.0005
03/22/06
03/22/06
NO
NO
 
Discharge from petroleum and metal refineries; erosion of natural deposits; discharge from mines.
 
22. Thallium (ppm)
      Well #2
      Well #3
0.5
0.5
.002
.002
0.0005
0.0005
03/22/06
03/22/06
NO
NO
 
Leaching from ore-processing sites; discharge from electronics, glass, and drug factories.
 
73. TTHM (Total trihalomethanes)       (mq/l)
        Well #2 and Well #3                  combined average
0
 
0.080
 
0.017
 
09/06/07
 
NO
 
 
By-product of drinking water chlorination.

 

Microbiological Contaminants
MCLG
MCL
Your
Water
Sample
Date
Violation
Y/N
Likely Source of Contamination
 
# Total Coliform
 
0
 
>1
 
ND
 
Monthly
 
NO
 
Naturally present in the environment

 

Units Description: ppm: parts per million, or milligrams per liter (mg/l), ppb: parts per billion, or micrograms per liter (µg/l), pCi/l: picocuries per liter (a measure of radioactivity), % of monthly positive samples: Percent of samples taken monthly that were positive

 
Educational Information (No Violation):

Lead - Infants and young children are typically more vulnerable to lead in drinking water than the general population. It is possible that lead levels at your home may be higher than at other homes in the community as a result of materials used in your home’s plumbing. If you are concerned about elevated lead levels in your home’s water, you may wish to have your water tested and flush your tap for 30 seconds to 2 minutes before using tap water. Additional information is available from the Safe Drinking Water Hotline (1-80